S1 signalling bearer provides the following functions:
- Provision of reliable transfer of S1-AP message over S1-MME interface.
- Provision of networking and routeing function
- Provision of redundancy in the signalling network
- Support for flow control and congestion control
L2 - Data link layer
Support of any suitable data link layer protocol, e.g. PPP, Ethernet
IP layer
- The eNB and MME support IPv6 and/or IPv4
- The IP layer of S1-MME only supports point-to-point transmission for delivering S1-AP message.
- The eNB and MME support the Diffserv Code Point marking
Transport layer
SCTP is supported as the transport layer of S1-MME signalling bearer.
- SCTP refers to the Stream Control Transmission Protocol developed by the Sigtran working group of the IETF for the purpose of transporting various signalling protocols over IP network.
- There is only one SCTP association established between one MME and eNB pair.
- The eNB establishes the SCTP association. The SCTP Destination Port number value assigned by IANA to be used for S1AP is 36412.
Protocol specification
3GPP TS 36.410 - Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 layer 1 general aspects and principles
3GPP TS 36.411 - Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 layer 1
3GPP TS 36.412 - Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 signalling transport
IETF RFC 2460: "Internet Protocol, Version 6 (IPv6) Specification"
IETF RFC 791 (September,1981): "Internet Protocol"
IETF RFC 2474 (December 1998): "Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers"